Attention: to know which products and services are available in your country click on the flag of your country or contact our foreign sales office at [email protected]
SKU 6220-1 Categories , Tags , , , , , , ,

ADHERPOX PRO – NEW

CODE: 6220-1 Categories , Tags , , , , , , ,

TWO-PACK EPOXY PRIMER

  • Suited for: All types of boats
  • Recommended support: Steel, Aluminum, Wood, Vtr
  • Base: Solvent
Colour:
Pack Size (L)
  • 0,75
  • 2,5
DATA SHEET
SAFETY DATA SHEET
DOWNLOAD
ADHERPOX PRO - NEW
DESCRIPTION
Multi-Purpose Epoxy Primer and anti-fouling tie coat, ideal on both above and below waterline. With an improved formula, ADHERPOX PRO is a versatile two component epoxy primer, with excellent adhesion on every type of material (including light alloys) in a range of temperature and environmental conditions. If applied in several coats it creates an excellent anti-corrosion barrier with an overcoating time of up to 6 months* with itself, without the need to be sanded. ADHERPOX PRO can be used as an anti-fouling tie coat, with an overcoating time of up to 3 months* with any type of Veneziani anti-fouling.
TECHNICAL SPECIFICATIONS
Theoretical coverage 3.7 m²/L (150 µm)   /   9.3 m²/L (60 µm)
Mixing ratio 4:1
Recoating time 4h-6months (20°C)
Hard dry 7days (20°C)
Thinner 6610
TYPES OF APPLICATION
Brush, Roller, Air spray, Airless
PLUS
  • Suitable for all types of substrates
  • Long recoatability without sanding
  • Corrosion-resistant

Painting Cycles

  1. 1 coat of Adherpox PRO (DFT 50 μm)
    If necessary apply a coat of Epomast Evo
    1 coat of Adherpox PRO (DFT 100 μm)
  2. 1 coat of Epoway (DFT 100 μm) or
    1 coat of Polygoal (DFT 100 μm)
  3. 2 coats of Gel Gloss Pro (DFT 40 μm)*
    *add Antiskid Powder or Antiskid Powder CF for the deck
  4. 3 coats of Adherpox PRO (DFT 150 μm)
  5. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

  1. 1 coat of Adherpox PRO (DFT 50 μm)
    If necessary apply a coat of Epomast Evo
    1 coat of Adherpox PRO (DFT 100 μm)
  2. 1 coat of Epoway (DFT 100 μm) or
    1 coat of Polygoal (DFT 100 μm)
  3. 2 coats of Gel Gloss Pro (DFT 40 μm)*
    *add Antiskid Powder or Antiskid Powder CF for the deck
  4. 2 coats of Adherpox PRO (DFT 150 μm)
  5. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

  1. 1 coat of Epoway (DFT 100 μm) or
    1 coat of Polygoal (DFT 100 μm)
  2. 2 coats of Gel Gloss Pro (DFT 40 μm)*
    *add Antiskid Powder or Antiskid Powder CF for the deck
  3. 1 coat of Adherpox PRO (DFT 60 μm)
  4. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

PREVENTION SYSTEM

  1. 2 coats of Aquastop (DFT 200 μm)
    Wait a minimum of 48 hours (maximum 72) at 20°C
    Before applying primer, sand with fine grade abrasive paper
  2. 1 coat of Adherglass (DFT 15 μm) or
    1 coat of Adherpox PRO (DFT 60 μm)
  3. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

REPAIR SYSTEM

  1. 1 coat of Aquastop (DFT 200 μm)
  2. After 16 hours fill with Epomast Evo. For any spot repairs use Epomast
    Sand the surface before continuing with subsequent coats
  3. 2 coats of Aquastop (DFT 200 μm)
    Wait a minimum of 48 hours (maximum 72) at 20°C.
    Before applying primer, sand with fine grade abrasive paper
  4. 1 coat of Adherglass (DFT 15 μm). Continue after 3-12 hours at 20°C or
    1 coat of Adherpox PRO (DFT 60 μm). Continue after 10 hours at 20°C
  5. 2 coats of Antifouling paint (DFT 50 μm)

WE RECOMMEND: launching the boat a minimum of seven days after application of the final coat of Aquastop.

ATTENTION: if the maximum recoating times are exceeded, always sand before continuing with the coating system.

The indicated thickness refers to a single coat.

  1. 1 coat of Adherpox PRO (DFT 60 μm)
    If necessary apply a coat of Epomast Evo
  2. 1 coat of Adherpox PRO (DFT 100 μm)
  3. 1 coat of Epoway (DFT 100 μm) or
    1 coat of Polygoal (DFT 100 μm)
  4. 2 coats of Gel Gloss Pro (DFT 40 μm)*
    *add Antiskid Powder or Antiskid Powder CF for the deck
  5. 2 coats of Resina 3+ (DFT 100 μm) and
    1 coat of Adherpox PRO (DFT 60 μm) or
    1 coat of Adherpox PRO (DFT 150 μm)
  6. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

METAL KEEL

  1. 3 coats of Adherpox PRO (DFT 150 μm)
  2. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

PEAKS, GALLEYS, ICE BOXES AND BILGES

Two-pack products: 2 coats of Unikote Pro, Adherpox PRO or Ecoplast (DFT 150 μm)
One-pack products: only for peaks and bilges, 2 coats of Sentiflex (DFT 40 μm)

The indicated thickness refers to a single coat.

RELATED PRODUCTS

Also use these products

SUBSTITUTE PRODUCTS

You might also be interested in

Primers & undercoats, osmosis
CHLORINATED RUBBER PRIMER WITH ALUMINIUM FLAKES
Primers & undercoats, osmosis
ADHESION PRIMER FOR GRP

Trova il rivenditore
più vicino a te!

Inserisci il tuo indirizzo o il tuo CAP per vedere la lista dei prodotti aggiornata

Oppure clicca qui per rilevare la tua posizione tramite GPS.