Painting cycles
Every boat needs a protective coating applied in a particular way
Giving a boat a protective coating is a complex operation that differs according to the hull material and the type of product used.
The cycle involves the application of a variety of one-pack or two-pack products in a precise sequence and in combinations determined by their specific characteristics. Optimal protection, aesthetics and durability are achieved by meticulous execution of individual steps.
- 1 coat of Adherpox (DFT 50 μm)
If necessary apply a coat of Epomast Evo
1 coat of Adherpox (DFT 100 μm) - 1 coat of Epoway (DFT 100 μm) or
1 coat of Polygoal (DFT 100 μm) - 2 coats of Gel Gloss Pro (DFT 40 μm)*
*add Antiskid Powder or Antiskid Powder CF for the deck - 3 coats of Adherpox (DFT 150 μm)
- 2 coats of Anti-Fouling paint (DFT 50 μm)
The indicated thickness refers to a single coat.
- 1 coat of Adherpox (DFT 50 μm)
If necessary apply a coat of Epomast Evo
1 coat of Adherpox (DFT 100 μm) - 1 coat of Epoway (DFT 100 μm) or
1 coat of Polygoal (DFT 100 μm) - 2 coats of Gel Gloss Pro (DFT 40 μm)*
*add Antiskid Powder or> Antiskid Powder CF for the deck - 2 coats of Adherpox (DFT 150 μm)
- 2 coats of Anti-Fouling paint (DFT 50 μm)
The indicated thickness refers to a single coat.
ONE-PACK SYSTEM
- 1 coat of Adherglass (DFT 15 μm) or
1 coat of Ticoprene(DFT 60 μm) and
1 coat of Gelprime (DFT 45 μm) - 2 coats of Easylac (DFT 40 μm) or
2 coats of Unigloss (DFT 40 μm)*
*add Antiskid Powder or Antiskid Powder CF for the deck - 1 coat of Adherglass (DFT 15 μm) or
1 coat of Ticoprene (DFT 60 μm) - 2 coats of Anti-Fouling paint (DFT 50 μm)
The indicated thickness refers to a single coat.
TWO-PACK SYSTEM
- 1 coat of Epoway (DFT 100 μm) or
1 coat of Polygoal (DFT 100 μm) - 2 coats of Gel Gloss Pro (DFT 40 μm)*
*add Antiskid Powder orAdherpox (DFT 60 μm) - 2 coats of Antifouling paint (DFT 50 μm)
ONE-PACK SYSTEM
- 1 coat of Gelprime (DFT 45 μm)
- 2 coats of Easylac (DFT 40 μm, ) or
2 coats of Unigloss (DFT 40 μm)*
*add Antiskid Powder or Antiskid Powder CF for the deck - 1/3 coats of Ticoprene (DFT 60 μm)
- 2 coats of Anti-Fouling paint (DFT 50 μm)
The indicated thickness refers to a single coat.
TWO-PACK SYSTEM
- 1 coat of Adherpox (DFT 60 μm)
If necessary apply a coat of Epomast Evo - 1 coat of Adherpox (DFT 100 μm)
- 1 coat of Epoway (DFT 100 μm) or
1 coat of Polygoal (DFT 100 μm) - 2 coats of Gel Gloss Pro (DFT 40 μm)*
*add Antiskid Powder or Antiskid Powder CF for the deck - 2 coats of Resina 3+ (DFT 100 μm) and
1 coat of Adherpox (DFT 60 μm) or
1 coat of Adherpox (DFT 150 μm) - 2 coats of Anti-Fouling paint (DFT 50 μm)
The indicated thickness refers to a single coat.
ONE-PACK SYSTEM
- 1 coat of S-Protect (DFT 20 μm)
and 3/4 coat of SB-Protect (DFT 30 μm) - 4/6 coat of V-Shine
or V-Matt (DFT 30 μm)
TWO-PACK SYSTEM
- 1 coat of S-Protect (DFT 20 μm)
and 3/4 coat of SB-Protect (DFT 30 μm) - 2 coats of Resina 3+ (DFT 100 μm)
- 4/6 coat of V-Shine
or VB-Shine HP
or VB-Matt HP (DFT 30 μm)
ONE-PACK SYSTEM
- 1 coat of S-Protect Aqua (DFT 20 μm)
- 4/6 coat of V-Shine Aqua
or V-Matt Aqua (DFT 30 μm)
TWO-PACK SYSTEM
- 1 coat of S-Protect Aqua (DFT 20 μm)
- 2 coats of Resina 3+ (DFT 100 μm)
- 4/6 coat of VB-Shine Aqua
or VB-Matt Aqua (DFT 30 μm)
OSMOSIS
PREVENTION SYSTEM
- 2 coats of Aquastop (DFT 200 μm)
Wait a minimum of 48 hours (maximum 72) at 20°C
Before applying primer, sand with fine grade abrasive paper - 1 coat of Adherglass (DFT 15 μm) or
1 coat of Adherpox (DFT 60 μm) - 2 coats of Anti-Fouling paint (DFT 50 μm)
The indicated thickness refers to a single coat.
REPAIR SYSTEM
- 1 coat of Aquastop (DFT 200 μm)
- After 16 hours fill with Epomast Evo. For any spot repairs use Epomast
Sand the surface before continuing with subsequent coats - 2 coats of Aquastop (DFT 200 μm)
Wait a minimum of 48 hours (maximum 72) at 20°C.
Before applying primer, sand with fine grade abrasive paper - 1 coat of Adherglass (DFT 15 μm). Continue after 3-12 hours at 20°C or
1 coat of Adherpox (DFT 60 μm). Continue after 10 hours at 20°C - 2 coats of Anti-Fouling paint (DFT 50 μm)
WE RECOMMEND: launching the boat a minimum of seven days after application of the final coat of Aquastop.
ATTENTION: if the maximum recoating times are exceeded, always sand before continuing with the coating system.
The indicated thickness refers to a single coat.
SPECIAL PARTS
METAL KEEL
- 3 coats of Adherpox (DFT 150 μm)
- 2 coats of Anti-Fouling paint (DFT 50 μm)
The indicated thickness refers to a single coat.
PROPELLERS, SHAFTS AND STERNDRIVES
- 1 coat of Propeller Primer (DFT 15 μm)
- 2 coats of Propeller (DFT 60 μm)
The indicated thickness refers to a single coat.
PEAKS, GALLEYS, ICE BOXES AND BILGES
Two-pack products: 2 coats of Unikote Pro, Adherpox or Ecoplast (DFT 150 μm)
One-pack products: only for peaks and bilges, 2 coats of Sentiflex (DFT 40 μm)
The indicated thickness refers to a single coat.
One-pack products: only for peaks and bilges, 2 coats of Sentiflex (DFT 40 μm)
The indicated thickness refers to a single coat.
INFLATABLE BOATS
- 2 coats of Gummipaint (DFT 40 μm)
- 2 coats of Gummipaint A/F (DFT 25 μm)
Rigid GRP hulls: see GRP boat hull system