SKU 6491 Categories Primers & undercoats, osmosis, View all Tags .N.A., All types of boats, Hull, VTR

AQUASTOP

CODE: 6491 Categories Primers & undercoats, osmosis, View all Tags .N.A., All types of boats, Hull, VTR

Antiosmosis protection and treatment

Suited for: All types of boats
Recommended support: Vtr

Rivenditore

Pack Size

Colour

Colour:

Pack Size (L)

0,75
2,5

DATA SHEET

SAFETY DATA SHEET

DOWNLOAD

DESCRIPTION

Aquastop is designed specifically for the treatment of GRP boats affected by OSMOSIS and is particularly recommended as a preventative, protective treatment. This product is water resistant (both sea and fresh water), making the boat highly impermeable, and forms an effective barrier layer for submerged metal parts (keels, flaps, rudders, etc.).

TECHNICAL SPECIFICATIONS

Theoretical coverage	5,0 m2L
Mixing ratio	3:2
Recoating time	16-48h (20°C)
Hard dry	7 days (20°C)
Thinner	6610 for cleaning only

TYPES OF APPLICATION

Brush, Roller

PLUS

Designed to prevent and treat the osmosis phenomenon
Waterproofing power with a reduced number of coats
Solvent-free and easy to apply

Painting Cycles

GRP AND COMPOSITES
OSMOSIS

1 coat of Epoway (DFT 100 μm) or
1 coat of Polygoal (DFT 100 μm)
2 coats of Gel Gloss Pro (DFT 40 μm)*
*add Antiskid Powder or Antiskid Powder CF for the deck
1 coat of Adherpox (DFT 60 μm)
2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

PREVENTION SYSTEM

2 coats of Aquastop (DFT 200 μm)
Wait a minimum of 48 hours (maximum 72) at 20°C
Before applying primer, sand with fine grade abrasive paper
1 coat of Adherglass (DFT 15 μm) or
1 coat of Adherpox (DFT 60 μm)
2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

REPAIR SYSTEM

1 coat of Aquastop (DFT 200 μm)
After 16 hours fill with Epomast Evo. For any spot repairs use Epomast
Sand the surface before continuing with subsequent coats
2 coats of Aquastop (DFT 200 μm)
Wait a minimum of 48 hours (maximum 72) at 20°C.
Before applying primer, sand with fine grade abrasive paper
1 coat of Adherglass (DFT 15 μm). Continue after 3-12 hours at 20°C or
1 coat of Adherpox (DFT 60 μm). Continue after 10 hours at 20°C
2 coats of Antifouling paint (DFT 50 μm)