Attention: to know which products and services are available in your country click on the flag of your country or contact our foreign sales office at sales@venezianiyachting.com
SKU 6210 Categories , Tags , , , , , , ,

ADHERPOX

CODE: 6210 Categories , Tags , , , , , , ,

TWO-PACK EPOXY PRIMER

  • Suited for: All types of boats
  • Recommended support: Steel, Aluminum, Wood, Vtr
  • Base: Solvent
Colour:
Pack Size (L)
  • 0,75
  • 2,5
DATA SHEET
SAFETY DATA SHEET
DOWNLOAD
ADHERPOX - Primer, fondi e osmosi Veneziani
DESCRIPTION
Modified two-component epoxy primer suitable for boat-hulls but also recommended for topsides and superstructures. Adherpox has been formulated for all types of boat building materials (aluminium included). If several coats are applied, this primer provides good corrosion protection. Thanks to its high solids by volume Adherpox complies with VOC-regulations.A special feature of Adherpox is its extended recoating interval: 3 months when recoated with antifoulings and 6 months when recoated with an additional coat of Adherpox, without sanding.
TECHNICAL SPECIFICATIONS
Theoretical coverage 11,3 m2L
Mixing ratio 3:1
Recoating time 10h-3/6months (20°C)
Hard dry 7days (20°C)
Thinner 6610
TYPES OF APPLICATION
Brush, Roller, Air spray, Airless
PLUS
  • Suitable for all types of substrates
  • Long recoatability without sanding
  • Corrosion-resistant

Painting Cycles

  1. 1 coat of Adherpox (DFT 50 μm)
    If necessary apply a coat of Epomast Evo
    1 coat of Adherpox (DFT 100 μm)
  2. 1 coat of Epoway (DFT 100 μm) or
    1 coat of Polygoal (DFT 100 μm)
  3. 2 coats of Gel Gloss Pro (DFT 40 μm)*
    *add Antiskid Powder or Antiskid Powder CF for the deck
  4. 3 coats of Adherpox (DFT 150 μm)
  5. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

  1. 1 coat of Adherpox (DFT 50 μm)
    If necessary apply a coat of Epomast Evo
    1 coat of Adherpox (DFT 100 μm)
  2. 1 coat of Epoway (DFT 100 μm) or
    1 coat of Polygoal (DFT 100 μm)
  3. 2 coats of Gel Gloss Pro (DFT 40 μm)*
    *add Antiskid Powder or Antiskid Powder CF for the deck
  4. 2 coats of Adherpox (DFT 150 μm)
  5. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

  1. 1 coat of Epoway (DFT 100 μm) or
    1 coat of Polygoal (DFT 100 μm)
  2. 2 coats of Gel Gloss Pro (DFT 40 μm)*
    *add Antiskid Powder or Antiskid Powder CF for the deck
  3. 1 coat of Adherpox (DFT 60 μm)
  4. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

PREVENTION SYSTEM

  1. 2 coats of Aquastop (DFT 200 μm)
    Wait a minimum of 48 hours (maximum 72) at 20°C
    Before applying primer, sand with fine grade abrasive paper
  2. 1 coat of Adherglass (DFT 15 μm) or
    1 coat of Adherpox (DFT 60 μm)
  3. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

REPAIR SYSTEM

  1. 1 coat of Aquastop (DFT 200 μm)
  2. After 16 hours fill with Epomast Evo. For any spot repairs use Epomast
    Sand the surface before continuing with subsequent coats
  3. 2 coats of Aquastop (DFT 200 μm)
    Wait a minimum of 48 hours (maximum 72) at 20°C.
    Before applying primer, sand with fine grade abrasive paper
  4. 1 coat of Adherglass (DFT 15 μm). Continue after 3-12 hours at 20°C or
    1 coat of Adherpox (DFT 60 μm). Continue after 10 hours at 20°C
  5. 2 coats of Antifouling paint (DFT 50 μm)

WE RECOMMEND: launching the boat a minimum of seven days after application of the final coat of Aquastop.

ATTENTION: if the maximum recoating times are exceeded, always sand before continuing with the coating system.

The indicated thickness refers to a single coat.

  1. 1 coat of Adherpox (DFT 60 μm)
    If necessary apply a coat of Epomast Evo
  2. 1 coat of Adherpox (DFT 100 μm)
  3. 1 coat of Epoway (DFT 100 μm) or
    1 coat of Polygoal (DFT 100 μm)
  4. 2 coats of Gel Gloss Pro (DFT 40 μm)*
    *add Antiskid Powder or Antiskid Powder CF for the deck
  5. 2 coats of Resina 3+ (DFT 100 μm) and
    1 coat of Adherpox (DFT 60 μm) or
    1 coat of Adherpox (DFT 150 μm)
  6. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

METAL KEEL

  1. 3 coats of Adherpox (DFT 150 μm)
  2. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

PEAKS, GALLEYS, ICE BOXES AND BILGES

Two-pack products: 2 coats of Unikote Pro, Adherpox or Ecoplast (DFT 150 μm)
One-pack products: only for peaks and bilges, 2 coats of Sentiflex (DFT 40 μm)

The indicated thickness refers to a single coat.

RELATED PRODUCTS

Also use these products

SUBSTITUTE PRODUCTS

You might also be interested in

Primers & undercoats, osmosis
CHLORINATED RUBBER PRIMER WITH ALUMINIUM FLAKES
Primers & undercoats, osmosis
ADHESION PRIMER FOR GRP

Trova il rivenditore
più vicino a te!

Inserisci il tuo indirizzo o il tuo CAP per vedere la lista dei prodotti aggiornata

Oppure clicca qui per rilevare la tua posizione tramite GPS.