Attention: to know which products and services are available in your country click on the flag of your country or contact our foreign sales office at sales@venezianiyachting.com
SKU 6624 Categories , Tags , , ,

ADHERGLASS

CODE: 6624 Categories , Tags , , ,

ADHESION PRIMER FOR GRP

  • Suited for: All types of boats
  • Recommended support: Vtr
  • Base: Solvent
Colour:
Pack Size (L)
  • 0,75
  • 5
DATA SHEET
SAFETY DATA SHEET
DOWNLOAD
ADHERGLASS - Primer, fondi e osmosi Veneziani
DESCRIPTION
Adherglass is a primer which is based on synthetic polymers. It is a one-component primer providing good adhesion and suitable for use on gel coats, GRP and epoxies such as Epoway and Aquastop. Adherglass is quick-drying and is used principally as a primer for anti-fouling on GRP or on new or stripped gel coats. The surface does not require sanding to guarantee good adhesion, but must be thoroughly degreased.
TECHNICAL SPECIFICATIONS
Theoretical coverage 13,3 m2L
Recoating time 3-12h (20°C)
Hard dry 6h (20°C)
Thinner 6780 for cleaning only
TYPES OF APPLICATION
Brush
PLUS
  • Strong anchoring action even without sanding
  • Suitable for gel coat, fiberglass, and epoxy bases
  • Rapid drying

Painting Cycles

  1. 1 coat of Adherglass (DFT 15 μm) or
    1 coat of Ticoprene(DFT 60 μm) and
    1 coat of Gelprime (DFT 45 μm)
  2. 2 coats of Easylac (DFT 40 μm) or
    2 coats of Unigloss (DFT 40 μm)*
    *add Antiskid Powder or Antiskid Powder CF for the deck
  3. 1 coat of Adherglass (DFT 15 μm) or
    1 coat of Ticoprene (DFT 60 μm)
  4. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

PREVENTION SYSTEM

  1. 2 coats of Aquastop (DFT 200 μm)
    Wait a minimum of 48 hours (maximum 72) at 20°C
    Before applying primer, sand with fine grade abrasive paper
  2. 1 coat of Adherglass (DFT 15 μm) or
    1 coat of Adherpox (DFT 60 μm)
  3. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

REPAIR SYSTEM

  1. 1 coat of Aquastop (DFT 200 μm)
  2. After 16 hours fill with Epomast Evo. For any spot repairs use Epomast
    Sand the surface before continuing with subsequent coats
  3. 2 coats of Aquastop (DFT 200 μm)
    Wait a minimum of 48 hours (maximum 72) at 20°C.
    Before applying primer, sand with fine grade abrasive paper
  4. 1 coat of Adherglass (DFT 15 μm). Continue after 3-12 hours at 20°C or
    1 coat of Adherpox (DFT 60 μm). Continue after 10 hours at 20°C
  5. 2 coats of Antifouling paint (DFT 50 μm)

WE RECOMMEND: launching the boat a minimum of seven days after application of the final coat of Aquastop.

ATTENTION: if the maximum recoating times are exceeded, always sand before continuing with the coating system.

The indicated thickness refers to a single coat.

RELATED PRODUCTS

Also use these products

SUBSTITUTE PRODUCTS

You might also be interested in

Primers & undercoats, osmosis
CHLORINATED RUBBER PRIMER WITH ALUMINIUM FLAKES
Primers & undercoats, osmosis
TWO-PACK EPOXY PRIMER

Trova il rivenditore
più vicino a te!

Inserisci il tuo indirizzo o il tuo CAP per vedere la lista dei prodotti aggiornata

Oppure clicca qui per rilevare la tua posizione tramite GPS.