SEALING PRIMER FOR WOOD
A two-pack polyurethane primer for wood with excellent sealing properties. It’s deep penetration makes the surface highly impermeable and hard. This product is recommended for use mainly on new or stripped wood. When correctly applied in a single coat it does not form a film but penetrates into the surface. In colourless version it does not alter the original colour of the wood and does not yellow with age. This product can be painted over with a wide range of products such as Eurogel, Epoway, Resina 2000, Ticoprene, Timber Gloss, Wood Gloss, Wood Mat.
6780 for cleaning only
Specific gravity 0,98 ± 0,02 g/cm3
Solids by volume: 25%
Microfibre belongs to the range of additives to be mixed with RESINA 2000 in order to produce compounds with different properties. MICROFIBRE consists of microfibers with an average length of 500 microns, which, when mixed with RESINA 2000, create a strong compound, owing to an multidirectional internal structure. Due to the low absorbency of resin, the penetration capacity of RESINA 2000 is not affected. The main purpose is the gluing of T-joints, where a filler with high viscosity and high mechanical resistance is required.
Microsfere belongs to the range of additives to be mixed with RESINA 2000 in order to produce compounds with different properties. MICROSFERE consists of microspheres with low absorbency of humidity, which therefore can be used for applications above and below the waterline. Their main purpose is the production of fillers with low specific gravity, which are easy to sand and whose consistency may be varied according to the needs of the operator. These fillers are best suited for the repair of horizontal cracks, small surface defects and as knifing fillers.
Microsilice belongs to the range of additives to be mixed with RESINA 2000 in order to produce compounds with different properties. MICROSILICE is a thickening additive used with RESINA 2000. Best suited for gluing, jointing and the repair of defective spots. It may be mixed together with other additives of the range in order to improve knife application and appearance of the product and is suitable for both above and below waterline applications.
PROTECTIVE BARRIER SYSTEM FOR WOOD
Resina 2000 is a solvent-free structural epoxy system designed for use in the construction, protection and restoration of wood, GRP and many other substrates. Resina 2000 is a technologically advanced system which offers excellent penetration, flexibility and adhesion which make it essential for maintaining and treating wood. With Resina 2000 it is possible to obtain high strength wood-to-wood joints, surface protection and an impermeable hull. Wood treated with Resina 2000 becomes impermeable and stronger while maintaining its characteristics of flexibility and resistance. Once the hardener has been add, special additives can be mixed in to obtain fillers which are easy to apply and extremely strong.
6610 for cleaning only
Specific gravity 1,10 ± 0,02 g/cm3
Solids by volume: 100%