ADHESION PRIMER FOR GRP
Adherglass is a primer which is based on synthetic polymers. It is a one-pack primer providing good adhesion and suitable for use on gel coats, GRP and epoxies such as Epoway and Aquastop. Adherglass is quick-drying and is used principally as a primer for antifouling on GRP or on new or stripped gel coats. The surface does not require sanding to guarantee good adhesion, but must be thoroughly degreased.
6780 for cleaning only
Specific gravity 1,21 ± 0,02 g/cm3
Solids by volume: 20%
TWO-PACK EPOXY PRIMER
Modified two-pack epoxy primer suitable for boat-hulls but also recommended for topsides and superstructures. Adherpox has been formulated for all types of boat building materials (aluminium included). If several coats are applied, this primer provides good corrosion protection. Thanks to its high solids by volume Adherpox complies with VOC-regulations.A special feature of Adherpox is its extended recoating interval: 3 months when recoated with antifoulings and 6 months when recoated with an additional coat of Adherpox, without sanding.
Specific gravity 1.30 ± 0,02 g/cm3
Solids by volume: 60%
ANTIOSMOSIS PROTECTION AND TREATMENT
Aquastop is designed specifically for the treatment of GRP boats affected by OSMOSIS and is particularly recommended as a preventative, protective treatment. This product is water resistant (both sea and fresh water), making the boat highly impermeable, and forms an effective barrier layer for submerged metal parts (keels, flaps, rudders, etc.).
6610 for cleaning only
Specific gravity 1,10 ± 0,02 g/cm3
Solids by volume: 100%
HIGH-BUILD EPOXY UNDERCOAT
Two-pack epoxy undercoat with barrier effect, which can be applied to any kind of substrate (wood, steel, aluminium and GRP). This coating may be used both as barrier coat and as undercoat for enamels. Can be recoated, after sanding, with two-pack enamels.
RUST-PROOFING ALKYD-TYPE PRIMER
Alkyd anti-rust mono-component undercoat, easy to apply, it has excellent covering power and can be used as a matt finish for interiors or as an intermediate coat for single-component cycles. It can be applied on old mono-component primers and finishes, sanded down, wooden surfaces and bare ferrous substrates.
It must not be applied on inorganic galvanizers or galvanized sheets. Not suitable for continuous immersion.
Specific gravity 1,35 ± 1,45 g/cm3
Solids by volume: 58 ± 2%
Polygoal is a two-pa, high-build polyacrylic undercoat with excellent performance. Easy to sand and therefore especially suitable as undercoat for top grade enamels. Since it is high-build, even one coat is helpful to cover possible micro-porosities of the substrate. It can be applied to previously sanded epoxy primers or fillers and also directly to properly sanded GRP or gel-coat. Polygoal is an excellent undercoat which enhances the gloss of polyurethane finishes.
PRIMER FOR PROPELLERS, SHAFTS AND STERN-GEAR
A one-pack primer for Propeller antifouling, based on synthetic resins, which adheres well to metal and alloys in general. Especially formulated to provide the adhesion of the antifouling Propeller, it can be used for all underwater metal parts which need to be protected against fouling such as propellers, shafts, flaps, etc. An improved primer which is quick drying, has good anticorrosion properties and is easy to use.
6470 for cleaning only
Specific gravity 1,10 ± 0,02 g/cm3
Solids by volume: 29%
CHLORINATED RUBBER PRIMER WITH ALUMINIUM FLAKES
Ticoprene is a one-pack chlorinated rubber primer pigmented with aluminium flakes, an all-purpose primer for the marine environment, suitable for maintenance painting of wood and steel boat hulls and structures. It can be applied also to zinc primers as well as to one-pack and two-pack primers. Well suited as a sealer for old antifoulings. Ticoprene provides good protection to parts immersed in salt and fresh water.
Specific gravity 1,26 ± 0,02 g/cm3
Solids by volume: 32%
MULTIPURPOSE EPOXY COATING
Two-pack, high-build paint with a dual-purpose: protection and finish. This paint can be applied to any type of preexisting coating in good condition. It can be applied also without primer directly to gel-coat, steel and light alloy both at low and high thickness. Unikote PRO withstands atmospheric agents, immersion, abrasion, wear and has a high chemical and mechanical resistance. This new formulation is resistant against carbamate formation with limited tendency to blushing. Therefore it can be used also as a finish for professional boats, although its glossiness fades faster if compared to enamels. Unikote PRO is the ideal paint for all working boats owing to its long protection, the possibility of application under less favourable climatic conditions as well as the practical advantage of using the same product for hull, topsides, deck and interiors.
Specific gravity 1,43 ± 0,02 g/cm3
Solids by volume: 80%