PRIMERS & UNDERCOATS, OSMOSIS
UNIKOTE PRO
MULTIPURPOSE EPOXY COATING
CODE: 6485
Two-pack, high-build paint with a dual-purpose: protection and finish. This paint can be applied to any type of preexisting coating in good condition. It can be applied also without primer directly to gel-coat, steel and light alloy both at low and high thickness. Unikote PRO withstands atmospheric agents, immersion, abrasion, wear and has a high chemical and mechanical resistance. This new formulation is resistant against carbamate formation with limited tendency to blushing. Therefore it can be used also as a finish for professional boats, although its glossiness fades faster if compared to enamels. Unikote PRO is the ideal paint for all working boats owing to its long protection, the possibility of application under less favourable climatic conditions as well as the practical advantage of using the same product for hull, topsides, deck and interiors.
COLOURS AND PACK SIZE
5 L
154
750
DOCUMENTS
CERTIFICATIONS
MATERIALS
TECHNICAL SPECIFICATIONS
Theoretical coverage5,3 m2L
Mixing ratio4:1
Recoating time4h (20°C)
Thinner6610
CHARACTERISTICS
TYPES OF APPLICATION
max 10%
max 10%
max 10%
max 10%
PAINTING CYCLES
Two-pack products: 2 coats of Unikote Pro, Adherpox or Ecoplast (DFT 150 μm)
One-pack products: only for peaks and bilges, 2 coats of Sentiflex (DFT 40 μm)
The indicated thickness refers to a single coat.
Ask the expert
If you have any questions about our products, how to use them, or any other matter, please don't hesitate to contact us.
Our experts are on hand to support you and offer advice on the best way to paint and protect your boat.
* mandatory fields